mixed measurments - ICEBERG.engineering

Mixed measurements data acquisition

Our multifunction Data Acquisition products

USB-6002

8 AI (16-Bit, 50 kS/s), 2 AO (5 kS/s/ch), 13 DIO USB Multifunction I/O Device

The USB‑6002 is a low-cost, multifunction DAQ device. It offers analog I/O, digital I/O, and a 32‑bit counter.

The USB‑6002 provides basic functionality for applications such as simple data logging, portable measurements, and academic lab experiments. The device features a lightweight mechanical enclosure and is bus powered for easy portability. You can easily connect sensors and signals to the USB‑6002 with screw-terminal connectivity. The included NI‑DAQmx driver and configuration utility simplify configuration and measurements.

USB-6000

500 S/s, ±20 mA, 16-Channel C Series Current Input Module

The NI‑9208 is designed with industrial systems in mind. It includes a high-resolution mode with 50/60 Hz rejection to remove low frequency noise.

It has high-channel density to reduce the number of modules needed, which leaves slots open for other measurement types or for reducing the overall per channel cost of the system. The NI‑9208 uses a standard D‑SUB connection for use with cables and connector blocks.

TS-15120

32-Channel, 5 V/3.3V TestScale Digital I/O Module

The TS-15120 provides bidirectional digital voltage signal capabilities for electrical functional test applications. This module helps you generate or measure voltage outputs or inputs, and features two selectable TLL-compliant logic levels.

The module also supports common Linux desktop distributions as well as integration with NI software such as TestStand, LabVIEW, and SystemLink. Additionally, the TS-15120 includes the NI-DAQmx driver, which includes example code and support for common languages such as Python, C/C++, .NET, and LabVIEW. You can use the module for TTL I/O; basic LED, button, and open/short test; event counters; pulse-wave modulation; and more.

Our multifunction Data Acquisition products

Model DI-1100

Data Acquisition USB DAQ and Data Logger System, 12-bit, 20,000-40,000 S/s/Ch

DI-1100 USB Data Acquisition starter kit with Windaq software. Features four differential analog input channels, 12-bit measurement resolution, and a full scale range of ±10V.

Suitable for measuring preamplified analog signals, the DI-1100 with included WinDaq software allows real time data acquisition, playback, and analysis performance equal to or better than other products that cost many times its low price. Predecessors of this instrument have been sold to over 35,000 hobbyists and professionals for countless data acquisition applications around the world. The DI-1100 continues this legacy with a higher resolution and faster ADC than its predecessor while retaining its noise-cancelling differential analog inputs that are level-protected to ±100 VDC or peak AC. This is our fastest, most flexible, and value-oriented starter kit ever. The DI-1100 offers four analog input and two discrete (digital) input channels. The analog inputs offer a fixed measurement range of ±10VFS, and are multiplexed to an integrated 12-bit ADC. Digital inputs are protected to ±30 V dc. Sample rates as slow as 20 Hz and as fast as 40 kHz with a single enabled channel are supported.

Model DI-188

Data Acquisition USB DAQ and Data Logger System, 12-bit, up to 8,000 S/s thourouput rate

DI-188 USB Data Acquisition starter kit with downloadable WinDaq software. Featuring four differential analog input channels, 12-bit measurement resolution and a fixed ±10V full scale measurement range. Sample rates as slow as 0.1 Hz and as fast as 8 kHz (with a single channel enabled) are supported. No programming needed when using WinDaq software!

Suitable for preamplified analog voltage measurements, the DI-188 (with included WinDaq software) allows for real time data acquisition, playback, and analysis, with performance equal to or better than comparable products in the same price category. Built on an Arduino® compatible module, the DI-188 begins a new chapter, with a fully open source firmware and protocol allowing for easy expansion. DI-188 is by far the most Arduino® community friendly, value-oriented starter kit ever.

ALLDAQ ADQ-212-cPCI_V2

CompactPCI Multi-I/O board, 16 bit A/D section up to 500 kHz with 16 differential analog inputs (±20V), 32 bidirectional TTL digital I/Os (level switchable: 3.3V/5V), 1 counter (type: 8254) with TTL I/O level

The analog input channels of the ADQ-210 series are sampled sequentially at max. 500 kHz according to the channel list, i.e. when all channels are sampled, the maximum sampling rate per channel is: 500 kHz / 16 channels = 31.25 kHz. Bandwidth and input impedance vary depending on the model. With an input voltage range of ±50 V, the ADQ-215 model is ideal for automotive applications

    16 differential analog inputs
    500 kHz 16 bit A/D converter
    Input voltage ranges ±20V
    Programmable channel list: 16 entries
    A/D values-FIFO: 8192 values
    Trigger: software, timer, ext. digital trigger (rising / falling edge)
    Two bidirectional 8 bit digital I/O ports usable via adapter cable with additional slot bracket (included)
    Voltage level of the digital I/Os switchable between 3.3 V and 5 V via software (TTL compatible)
    3 x 16 bit counter (type: 8254), 6 modes programmable
    External square wave signal for counter: max. 10 MHz

Software support

    Driver for Windows 10/8.1/8/7 (32/64 bit)
    Programming support (SDK) with examples for C++, C#, Visual Basic, Delphi/Pascal and Python included
    ALLDAQ Manager – utility software provides central access to ALLDAQ driver system parameters and help files
    Virtual Instruments (VIs) for LabVIEW™
    MATLAB® interface with examples and help file

Can't find what you need?

We Follow Best Practices

Our process will adaptable to your needs and systems, taking on consideration the following axes.